Escorene™ Ultra LD 726.07
单位    View this Datasheet as PDF 电邮一份说明书 Print this Page
乙烯醋酸乙烯酯共聚物树脂

Product Description
LD726.07 is primarily designed for high speed/low coating weight extrusion coating and is a good coextrusion partner with other polymers. LD726.07 is an excellent sealing material with a very low seal initiation temperature and high clarity.
 
General 
Availability 1 
  • Asia Pacific
  • Latin America
  • North America
Applications 
  • Adhesive Lamination
  • Barrier Food Packaging
  • Coextrusion Coating
  • Compounding
  • Document Plastification
  • Extrusion Coating
  • Extrusion Lamination
  • Flexible Packaging
  • High Frequency Sealing
  • Industrial Packaging
  • Injection Molding
  • Masterbatch Base Resin
  • Non-Woven Coating
  • PVC Replacement
  • Thermal Lamination
  • Wire and Cable Compounds
Processing Method 
  • Extrusion Coating
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.939
g/cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
14
g/10 min
ASTM D1238
Vinyl Acetate Content
18.0
wt%
ExxonMobil Method
Peak Melting Temperature
181
°F
ExxonMobil Method
 
Thermal
Typical Value
Unit
Test Based On
Vicat Softening Temperature
131
°F
ASTM D1525
 
Molded Properties
Typical Value
 
Test Based On
Durometer Hardness
  ASTM D2240
Shore A, 15 sec
> 90
 
 
Shore D, 15 sec
34
 
 
 
Film Properties
Typical Value
Unit
Test Based On
Tensile Strength at Break MD
1100
psi
ASTM D882
Elongation at Break MD
> 800
%
ASTM D882
 
Coating Properties
Typical Value
Unit
Test Based On
Draw Down (Constant output at 35 rpm, 446°F)
540
m/min
ExxonMobil Method
Neck-in
  ExxonMobil Method
328 ft/min, Constant output at 35 rpm, 446°F
4.3
in
 
656 ft/min, Constant output at 35 rpm, 446°F
3.7
in
 
 
Processing Statement
1 Constant output at 35 rpm, 446°F (230°C). Coating Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other standard conditions. Typical coating values obtained on a pilot coextrusion coating line at ExxonMobil Europe Technical Center, at an air gap of 170 mm (6.22 inches).
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
 
标准免责声明中文译文 www.exxonmobilchemical.com/ContactUs
全球和美洲地区
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
亚太地区
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
欧洲、中东和非洲地区
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2024 埃克森美孚。埃克森美孚（ExxonMobil），埃克森美孚的徽标（ExxonMobil logo）及连接的“X”设计和在本文件中使用的所有其他产品或服务名称，除非另有标明，否则均为埃克森美孚的商标。未经埃克森美孚的事先书面授权，不得分发、展示、复印或改变本文件。使用者可在埃克森美孚授权的范围内，分发、展示和/或复印本文件，但必须毫无改动并保持其完整性，包括所有的页眉、脚注、免责声明及其它信息。使用者不可将本文件全文或部份复制到任何网站。埃克森美孚不保证典型（或其它）数值。本文件包含的所有数据是基于代表性样品的分析，而不是实际运送的产品。本文件所含信息仅是所指明的产品或材料未与任何其它产品或材料结合使用时的相关信息。我们的信息基于收集之日被认为可靠的数据，但是，我们并不明示或暗示地陈述、担保或以其它方式保证此信息或所描述产品、材料或工艺的适销性、适宜于某一特定用途、不侵犯专利权、适用性、准确性、可靠性或完整性。使用者对在其感兴趣的领域使用该材料、产品或工艺所做的一切决定负全部责任。我们明确声明将不对由于任何人使用或依赖本文件所含任何信息而导致的或与此相关的直接或间接遭受或者产生的任何损失、损害或伤害承担责任。本文件不应视作我们对任何非埃克森美孚产品或工艺的认可，并且我们明确否认任何相反的含意。“我们”、“我们的”、“埃克森美孚化工”或“埃克森美孚”等词语均为方便而使用，可包括埃克森美孚化工公司、埃克森美孚公司，或由它们直接或间接控制的任何关联公司中的一家或者多家。